| Ụdị Ụgwọ: | T/T,Paypal |
| Enweghi ike: | FOB,CFR,CIF,EXW,DDU |
| Min. Nhazi: | 1 Kilogram |
| Ụgbọ njem: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Ihe Nlereanya.: TECAMID 66 natural PA 66 UNFILLED
Eke: Tecamid
| Ere Ngwa | : | Kilogram |
| Agedị ngwugwu | : | Ngwugwu mbupụ |
The file is encrypted. Please fill in the following information to continue accessing it
Polyamide 66 nwere ezigbo ihe ike, isi ike, iguzogide na nkwụsi ike na-enweghị isi. Na mgbakwunye, nylon 66 enweela iyi egwu na-eguzogide na akụrụngwa dị ala. Ọ dịkwa ezigbo mma nke ukwuu, kemịkalụ, yana Njirimara Mmetụta. Ndị ọrụ kwesịrị ịma nke PA 66 na-eme ka mmiri nwee ike imetụta nguzosi ike. N'ezie, Pa 66 ga-enwe ike ịmịnye mmiri karịa ụdị paịkọ na ngwa eletrik, mmiri, na-aga n'ihu, owuwu na mincerry.
Eziokwu
Ngosipụta kemịkal
Pa 66 (Polyamide 66)
Agba
aiviri
Keuju
1.15 g / cm3
Isi atụmatụ
ezigbo slide ma na-eyi ihe
Electring inclitating
Ezigbo uwe
ezigbo weddeble na nke a na-ejikọ
ike dị elu
na-eguzogide ọtụtụ mmanụ, griidu na mmanụ
ike siri ike
Izu ụlọ
mmụta mekanịkal injinịa
Teknụzụ nri
elektrọniki
Aircraft na teknụzụ aeropace
Industrylọ ọrụ na-arụ ọrụ
Tecamid 66 PA PA 66 AKUKO AKUKO AKUKO AKUKO
| Mechanical Properties | ||||
| VALUE | UNIT | PARAMETER | NORM | |
| Modulus of elasticity | 3500 | MPa | 1mm/min | DIN EN ISO 527-2 |
| (tensile test) | ||||
| Tensile strength | 85 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Tensile strength at yield | 84 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Elongation at yield (tensile test) | 7 | % | 50mm/min | DIN EN ISO 527-2 |
| Elongation at break (tensile test) | 70 | % | 50mm/min | DIN EN ISO 527-2 |
| Flexural strength | 110 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| Modulus of elasticity | 3100 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| (flexural test) | ||||
| Compression modulus | 2700 | MPa | 5mm/min, 10 N | EN ISO 604 |
| Impact strength (Charpy) | n.b. | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eU |
| Notched impact strength (Charpy) | 5 | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eA |
| Ball indentation hardness | 175 | MPa | ISO 2039-1 | |
| Compression strength | 20/35/81 | MPa | 1% / 2% / 5% | EN ISO 604 |
| Thermal Prpperties | ||||
| ROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Glass transition temperature | 47 | C | DIN EN ISO 11357 | |
| Melting temperature | 258 | C | DIN EN ISO 11357 | |
| Thermal conductivity | 0.36 | W/(k*m) | ISO 22007-4:2008 | |
| Specific heat | 1.5 | J/(g*K) | ISO 22007-4:2008 | |
| Service temperature | 170 | C | short term | NN |
| Service temperature | 100 | C | long term | NN |
| Thermal expansion (CLTE) | 11 | 10-5*1/K | 23-60℃, long. | DIN EN ISO 11359-1;2 |
| Thermal expansion (CLTE) | 12 | 10-5*1/K | 23-100℃, long. | DIN EN ISO 11359-1;2 |
| Electrical Properties | ||||
| ROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| surface resistivity | 1014 | Ω | - | |
| volume resistivity | 1014 | Ω | ||
| Other Properties | ||||
| VALUE | UNIT | PARAMETER | NORM | |
| Resistance to hot water/ bases | (+) | - | - | |
| Flammability (UL94) | HB | - | corresponding to | DIN IEC 60695-11-10; |
| Resistance to weathering | - | - | - | |
| Water absorption | 0.2 - 0.4 | % | 24h / 96h (23°C) | DIN EN ISO 62 |
Nkwupụta nzuzo: Nzuzo gị dị anyị ezigbo mkpa. Companylọ ọrụ anyị na-ekwe nkwa igosipụta ozi nkeonwe gị na mgbasa ozi ọ bụla na-egosi na ọ bụla e ji ikike doo.
Dejupụta ozi ndị ọzọ ka ọ nwee ike ịkpọtụrụ gị ngwa ngwa
Nkwupụta nzuzo: Nzuzo gị dị anyị ezigbo mkpa. Companylọ ọrụ anyị na-ekwe nkwa igosipụta ozi nkeonwe gị na mgbasa ozi ọ bụla na-egosi na ọ bụla e ji ikike doo.
Contact Now