| Ụdị Ụgwọ: | T/T,Paypal |
| Enweghi ike: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Nhazi: | 1 Kilogram |
| Ụgbọ njem: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Ihe Nlereanya.: HONY-PP
Eke: Hoyi
| Ere Ngwa | : | Kilogram |
| Agedị ngwugwu | : | Ngwugwu mbupụ |
The file is encrypted. Please fill in the following information to continue accessing it
Polypropylene bụ ihe akụ na ụba na-enye ngwakọta nke anụ ahụ, kemịkal, igwe, igwe na-ahụghị na ihe ndị ọzọ na eletriki ọ bụla ọzọ. Tụnyere posyethylene dị ala ma ọ bụ dị elu, ọ nwere ike mmetụta dị ala, mana elu dị elu na ike ọrụ na ike tensile.
Njirimara igodo
Na-echeputa ngwa ngwa
Ezigbo doelcticc
Ike dị elu
Ike tensile di elu
Mmetụta na-eguzogide
Dị nro
Mwepu mmiri mmiri
Na-enweghị ntụpọ
Na-abụghị ihe na-egbu egbu
Na-amachibido ọtụtụ alkalis na acid
Na-agagharị na-efe efe
Na-ejigidesi ike na flex
Nti
Ike dị ala karịa hdpe
Ndogide na-adịghị mma na aromatic, aliphatic na ngwọta na-akwụ ụgwọ.
Ngwa
Kemịkalụ na-eguzogide & ahịrị
Ime ụlọ ime ụlọ dị ọcha, ala ụlọ
Nwunye na-egbutu paịlị
Contas Pas Pas
Nlekọta ụlọ nyocha, sinks & ducts
Ibe oghere
Ahịhịa mmiri & tankị
Ngwaọrụ nke onye na-enye mmụọ
Ihe mgbapụta & ụlọ
Okporo ụzọ okporo ụzọ na-agafe
Njirimara nke polypropylenene p
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic | ||
| Chemical Name | PP Polypropylene | ||
| Additives | Unfilled | ||
| Color | Natural | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 0.95 |
| ASTM D792 | lb/in³ | 0.034 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | <.01 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 4,800 |
| Tensile Modulus | ASTM D638 | psi | 195,000 |
| Tensile Elongation at Break | ASTM D638 | % | 400 |
| Flexural Strength | ASTM D790 | psi | 7,000 |
| Flexural Modulus | ASTM D790 | psi | 180,000 |
| Compressive Strength | ASTM D695 | psi | 7,000 |
| Hardness | ASTM D785 | NA | Shore D78 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 1.2 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 6.2 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 52 |
| ASTM D648 | °F at 264 psi | 125 | |
| Melting Point Temp | ASTM D3418 | °C | 164 |
| ASTM D3418 | °F | 327 | |
| Max Continuous Operating Temp | °C | 82 | |
| °F | 180 | ||
| Minimum Operating Temp | °C | -10 | |
| °F | 14 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 0.76 |
| ASTM C117 | x 10^4 cal/cm-sec-°C | 2.6 | |
| Flammability Rating | UL94 | NA | HB |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 500 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 2.25 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.001 |
| Surface Resistivity | ASTM D257 | ohm/square | 10^12 |
Nkwupụta nzuzo: Nzuzo gị dị anyị ezigbo mkpa. Companylọ ọrụ anyị na-ekwe nkwa igosipụta ozi nkeonwe gị na mgbasa ozi ọ bụla na-egosi na ọ bụla e ji ikike doo.
Dejupụta ozi ndị ọzọ ka ọ nwee ike ịkpọtụrụ gị ngwa ngwa
Nkwupụta nzuzo: Nzuzo gị dị anyị ezigbo mkpa. Companylọ ọrụ anyị na-ekwe nkwa igosipụta ozi nkeonwe gị na mgbasa ozi ọ bụla na-egosi na ọ bụla e ji ikike doo.
Contact Now