| Ụdị Ụgwọ: | T/T,Paypal |
| Enweghi ike: | CFR,FOB,CIF,EXW,DDP,DDU |
| Min. Nhazi: | 1 Kilogram |
| Ụgbọ njem: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Ihe Nlereanya.: Semitron® CMP XL20
Eke: Semitron
| Ere Ngwa | : | Kilogram |
| Agedị ngwugwu | : | Ngwugwu mbupụ |
The file is encrypted. Please fill in the following information to continue accessing it
Setyon® CMP XL20 sitere na Resinsen-Basen resin na inye onyinye na-eyi ndụ karịa ugboro 20 nke gburugburu CMP Cheminy nke ọma. Ihe a nwere ngwakọta kachasị mma nke iyi ndụ, yana ike na isi ike, dị mma maka ngwa ndị kachasị achọ na gburugburu usoro.
Ngwongwo onwunwe
Ike dị elu na stiiffy na-akwalite ntụpọ dị ole na ole na uwe dị mma
Ezi kemịkalụ na-egbochi
Ezigbo uwe ndụ
Di nkpa
PPSIFS PPS ruru 20x na ọtụtụ usoro
Geomet
Seatron® CMP XL20 PAI ngwaahịa na-eme ka usoro nke usoro ọkọlọtọ na geomet ndị a: mkpanaka, efere
Agba dịnụ
Setron® cmp xl20 paịba na-abịa na agba ndị a: Green
Njirimara igodo
Dị ala dị ala na wafer
PPSIFS PPS ruru 20x na ọtụtụ usoro
Ike dị elu na stiiffy na-akwalite ntụpọ dị ole na ole na uwe dị mma
Ngwa
CMP na-ejigide mgbaaka
Njirimara nke Semitron ® CMP XL20 pai
| Description | Value | ||
| Material Type | Imidized Amorphous Thermoplastic | ||
| Chemical Name | PAI Polyamide-imide | ||
| Trade Name | Semitron® CMP XL20 | ||
| Color | Black Green Hue | ||
| Manufacturer | Quadrant | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.41 |
| ASTM D792 | lb/in³ | 0.051 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.4 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.7 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 18,000 |
| Tensile Modulus | ASTM D638 | psi | 600,000 |
| Tensile Elongation at Break | % | 10 | |
| Flexural Strength | ASTM D790 | psi | 24,000 |
| Flexural Modulus | ASTM D790 | psi | 600,000 |
| Compressive Strength | ASTM D695 | psi | 24,000 |
| Compressive Modulus | ASTM D695 | psi | 478,000 |
| Hardness | ASTM D785 | NA | Rockwell E80 / M120 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 2 |
| Dynamic Coefficient of Friction | - | NA | 0.35 |
| Wear K Factor | - | in³-min/ft-lbs-hr | 50 |
| Limiting PV | - | psi-fpm | 12,500 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 1.7 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 278 |
| ASTM D648 | °F at 264 psi | 532 | |
| Max Continuous Operating Temp | °C | 260 | |
| °F | 500 | ||
| Minimum Operating Temp | °C | -200 | |
| °F | -328 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 1.8 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 580 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 4.2 |
Nkwupụta nzuzo: Nzuzo gị dị anyị ezigbo mkpa. Companylọ ọrụ anyị na-ekwe nkwa igosipụta ozi nkeonwe gị na mgbasa ozi ọ bụla na-egosi na ọ bụla e ji ikike doo.
Dejupụta ozi ndị ọzọ ka ọ nwee ike ịkpọtụrụ gị ngwa ngwa
Nkwupụta nzuzo: Nzuzo gị dị anyị ezigbo mkpa. Companylọ ọrụ anyị na-ekwe nkwa igosipụta ozi nkeonwe gị na mgbasa ozi ọ bụla na-egosi na ọ bụla e ji ikike doo.
Contact Now